Firmware Version 3/4.31.37
Fix: Factory default of the alarms will copy now the default_level also into the
promoted_level.
4/29/2014 PS
Added in UAP mode the order processing database and functionality.
Added Order Number to UAP bol.
4/30/2014 PS
Enhancement added to Preset, Meter, Component and Additive level all totalizer
types.
Increased firmware version to x.31.16 .
5/03/2014 PS
Added ASTM D1555-09 API Table for Aromatic Hydrocarbons and Cyclohexane. Added a
product selection picklist for constants and use relative density for weight
calculations.
Help is added on component level for Hydrocarbon product selection list.
5/06/2014 PS
Added in the SD-Card Menu an option to format the SD-Card.
5/7/2014 WJP
Corrected density range check on manual entry of ticket data on CN builds.
Corrected CONFAR build since db_started flag change.
5/8/2014 PS
Added min max preset volume check for compartment volume in open loading mode.
Enhancement View Transaction Screen don't show net or mass value for meter level.
5/09/2014 PS
Fix: Alarm Details Detail Screen would only show 1 alarm instead of the occurred
alarms.
5/10/2014 PS
Fix: Only UAP Mode. When a date field is blank a possible script error was shown,
now the code will give access denied.
Fix: Previous Button on Supplier would give error.
5/13/2014 MTS
Enhancement: Add ML 10 custom prompts, apply to BOL and transactions comment
data.
Fix: Odd time conditions within Lua driver access time script.
5/13/2014 PS
Enhancement: BSW alarm range changed from unsigned to signed. Also default
minimum alarm changed to -1% and maximum alarm changed to 101%.
5/16/2014 WJP
Removed tabs from source code.
For UAP,
Added bay_id and prompt number to the key in BayPrompt database.
Cleaned up BayPrompt test data strings.
Updated deliver orders to include valid test data products.
Updated Custom Prompt comment names to be NAMExx and VALUE xx.
Updated Message Denied() script function to support key press and exit without
other commands and cleaned up prompt script.
Updated prompt script to report when date fields are blank with a specific
message.
To Next Page
Loading...
