Firmware Version 3/4.31.37
Enhancement: Complete redesign Communication Screen and added Audit Log to the
screen.
6/11/2014 PS
Enhancement: Added Audit Log to Network Screen, Printer Screen and Webpage
Screen.
Fix: If mass measure value is out of range show invalid message instead of none.
6/12/2014 PS
Enhancement: Password change for webpage will be logged in auditlog.
Fix: Password 1 to 5 would be not reported in the auditlog when updated via
communication. Only when the password was the same we would report.
Enhancement: Added Password security to Webpage passwords.(Minimum length, enter
old password, confirm new password)
6/13/2014 PS
Enhancement: Change Network Diagnostic Screen to ping each configured network
device as also to define one.
6/24/2014 TF
Increase firmware version to X.31.17
Fix FCM report bug. Additive level configs weren't being display correctly. Was
displaying the same parameters for multiple additives on the same port.
6/26/2014 PS
Change in Custom Logic the name Flip-flop to SetReset.
7/01/2014 PS
Upgraded Webserver to latest version 5.4 and refactor code.
7/01/2014 TF
Added feature for exporting the configuration to an Excel spreadsheet.
- Splits up the levels into separate worksheet tabs.
- Highlights any unique values that are non-default to yellow.
- If there are duplicate values that are non-default, it groups those values
by highlighting them a color other than yellow.
7/02/2014 PS
Fix: MRTD command change, ctl, cpl and vcf values from 5 to 6 long.
7/02/2014 PS
Enhancement: Added to custom logic scaling function and range checking function.
7/01/2014 PS
Remove MultiLoad Arm1 build.
Added MultiLoad SCS build.
Added new config exclusion for SCS.
Remove and replace logos MultiLoad II to new Toptech standard.
TODO: New logos are still missing.
Changed all logo scripts.
Update Makefile for SCS.
7/08/2014 PS
Added SSL to webserver. (Self-Signed Certificates, with all possible SSL
protocols)
7/14/2014 PS
Added SSL to webserver for simulation builds.
To Next Page
Loading...
