Firmware Version 3/4.31.37
11/3/2014 PS
Enhancement: When password reset function is used this will be reported in the
auditlog.
Enhancement: When selecting an email message in Custom Logic the Multiload will
show a part of that email message.
Enhancement: Added Preset, Meter and Component totalizers to the unauthorized
flow voucher.
11/4/2014 PS
Enhancement: If no password is configured password "00000" will bypass the login
screen and uses User ID 1 for reporting.
Enhancement: Added Username to Multiload2.
Added default usernames.
Enhancement: Added Username selection on Login Screen.
Enhancement: When the additive W&M Recipe Percentage is non-zero and the product
recipe does not include this additive,
MultiLoad will add this additive to the recipe with the W&M Recipe Percentage. If
the product recipe does include this additive,
but the percentage does not agree with the W&M Recipe Percentage, an error will
be displayed.
11/12/2014 PS
Enhancement: Included to Additive Trace message the additive recipe qty.
11/12/2014 MS
Enhancement: In UAP for a single data item picklist, the picklist will now
default to that data
and apply it without the operator seeing the query or selecting it.
11/17/2014 TF
Enhancement: Added Sampler functionality to UAP. It is now possible to setup a
recipe with Samplers in UAP and have it sent to the MultiLoad.
Enhancement: Increased the maximum number of Samplers from 4 to 20.
Fix: Potential Blue Screen if the user tried to upload a file via the web
interface to the SD Card and the card wasn't present, or if it was corrupted.
11/19/2014 TF
Fix: MRS response could potential write more characters for a value than TMS
could support. This could cause false errors in TMS due to the values being shifted
in the response string.
Enhancement: Added gross output pulse meter level.
Enhancement: Added gross, net, mass output pulse component level.
11/27/2014 PS
To Next Page
Loading...
