Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
Database Management
11-13
3If recovery is successful and the USB ONLY option had never been
engaged, the HFA II-
i
automatically completes the original function
(before failure). If recovery is successful and the USB ONLY option had
been engaged, the HFA II-
i
displays a reminder message. After reading
the message, press OK.
Copy to your hard drive any test results stored to the USB storage
device since the hard drive failure.
If recovery is unsuccessful, a message appears. Press OK.
If the failure occurred while saving test results or patient data, the
HFA II-
i
will save the data automatically to the USB storage device,
provided the USB storage device is attached. If the failure occurred
while performing file functions, go to the “Hard Drive Failure: REBUILD
HARD DISK DATABASE,” on page 11-17.