Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
Introduction & Instrument Setup
1-27
3. Plug in the purple PS/2 connector on the PS/2 splitter adapter into the purple PS/2 cable
connector from the keyboard, and the green PS/2 connector on the PS/2 splitter adapter into
the green PS/2 cable connector from the keyboard.
4. Power on the HFA II-
i
. The HFA will recognize the external keyboard automatically.
While many standard PC-type keyboar
ds (must have PS/2-style plug) may be plugged into the HFA
II-
i
and should work, Carl Zeiss Meditec can only guarantee full compatibility if you use the factory
keyboard. Please refer to “Using the External Keyboard,” on page 2-6 for further details regarding
keyboard use.
Removable USB Storage Devices and USB Floppy Drives
The HFA II-
i
has five USB ports for connecting removable USB storage devices (USB flash drives
and/or USB hard drives) and USB floppy drives. The side of the HFA II-
i
has two USB ports (see
Figure 1.4), and the rear has three USB ports on the cable connectio
ns panel (see Figure 1.8). All
removable USB storage devices and USB floppy disk drives ar
e hot-swappable—they can be
connected and removed without needing to restart the HFA II-
i
. Up to five USB storage devices can
be connected, but only two can be available to use. When you insert a USB storage device, the
device is automatically connected and its device name appears in a button or drop-down list for
selection. If two or more USB storage devices are already connected to the HFA II-
i
, you must
remove all of them and then insert the new one for it to be available for use.
CAUTION: Only remove a USB storage device or USB floppy drive when it is not
reading or writing data. Wait for the HFA progress bar to complete and/or the
device’s activity light to cease. Otherwise, you may damage or corrupt data on your
USB device.
CAUTION: Make sure your USB devices are secured against malware/viruses. Patient
data on USB devices can become corrupted when inserting into computers for
backup or transfer. The use of anti-virus software on computers is recommended and
is the responsibility of the user.
CAUTION: To protect your HFA data from unauthorized access, use dedicated USB
devices for storage of HFA data. Do not use these USB devices for any other data or
application. HFA data is not encrypted.
CAUTION: Health care providers have responsibility for the protection of patient
health information (PHI), both hardcopy and electronic. To protect patient
confidentiality of your electronic HFA data, the use of encryption is recommended
and is the responsibility of the user.
Note: The HFA is only compatible with USB storage devices formatted in FAT (FAT16) or FAT32. NTFS
or exFAT (FAT64) cannot be used and will report an “Unrecognized format” error. Also, the HFA can
only see and access the first partition of the USB storage device.
Note: Some USB hard drives may require connection to two USB ports or their own external power
supply to work correctly.
Note: An optional USB floppy disk drive should only be used for backwards compatibility. It is highly
recommended to use USB storage devices instead of floppy disks. Floppy disks may not be available
in the near future.
To Next Page
Loading...
Need help?
General
