Networking Reference
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
I-14
Figure I.15 Data Export Setup Screen
2 If you wish for the HFA II-
i
to prompt you to specify a new folder each time you conduct testing
of a patient, select the PROMPT FOR PATIENT FOLDER button (Figure I.15). An X will appear in
the button once you have selected it. Once this featur
e is activated, the HFA II-
i
will prompt you
to enter a folder name upon completion of each visual field examination.
3 Click SAVE and it will test the connection to the server and then return you to the
Communications Setup screen.
Archiving Data
The system software for the HFA II-
i
allows patient data and test data to be archived on a remote
server, using either FTP or a Shared Folder. You can archive data either manually or automatically.
The first archiving that you perform will archive the en
tire database on the HFA hard disk to the
server. Subsequent archiving operations will archive only new data that has been collected since the
last archiving was completed.
When needed, you can retrieve the archived data. The archive r
etrieval process (manual or
automatic) allows you to retrieve patient data that has been archived on the file server from other
HFA II-
i
perimeters.
Note: The retrieve process will not work until you first have archived data
to the server. If you have
several HFA II-
i
perimeters in your network, each one must have been archived previously, before
you can retrieve from all of them. To perform a manual archive, select MAIN MENU>
FILE
FUNCTIONS
>ARCHIVE/RETRIEVE>ARCHIVE. The archive operation will begin and run for a couple
of minutes, until the archive operation is completed.
To Next Page
Loading...
Need help?
General
