Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
Installing & Licensing HFA II-i Software
J-1
(J) Installing & Licensing HFA II-i Software
Please take a moment to read the following information before attempting to install any new
HFA II-
i
software.
Back Up All Data First
Be sure you have backed up (made copies of) all of your data. Yo
u should be careful to ensure that
you have copies of all your data backed up on either floppy disks, USB storage devices, or your
network file server (if you have licensed HFA-NET Pro software on your HFA II-
i
) before beginning
this procedure. If necessary, refer to Chapter 11, "Database Management," for instructions on how
to back up your data.
Identify the Current Software
Identify the software your instrument currently is running. Tu
rn on your instrument and allow it to
warm up. In the upper, left-hand corner of the Main Menu screen, the software revision will be
identified (
e.g.
“Rev. 5.1”).
Figure J.1 Location of the Software Revision Number