EasyConnect RCT 1.0
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
G-20
Custom Mode
Custom mode configures one or more instruments by specifying the setup for a specified set of
features.
Note: The difference between Easy and Custom modes is that in Custom mode the specified setup
w
ill be applied to the
selected
features of the selected instruments, while in Easy mode the setup
will be applied to
all
features of the selected instruments.
CAUTION: If you use Custom mode and change the User Name and/or password, you
will not be able to use Easy mode. Use Copy mode to copy the Custom mode
configuration to other instruments.
The following steps describe how to
use Custom mode.
1 Select CUSTOM from the SELECT A CONFIGURATION MODE radio buttons (Figure G.22) and then
select
NEXT to continue.
Figure G.22 Select Custom Configuration Mode
To Next Page
Loading...
