Networking
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
14-36
Printing To a File
The Print to a File utility is offered via the PRINT-TO-FILE SETUP button on the Print Setup screen. This
allows you to export both default-style and multi-test printouts along with their accompanying
patient and examination data as a computer file. Images are converted to TIFF or PDF files and the
data is exported as an XML file. This is the only way in which the multi-test printouts, such as GPA or
Overview, can be exported to the file server. If you have licensed and registered the DICOM Gateway
2.0 software, you can export an Encapsulated PDF to the DICOM Archive.
Note: With the “Save & Transmit” option set, when you save an exam, you will also transmit
only
the
default-style printout—not a full GPA or Overview multi-test printout for example (the GPA Single
Field Analysis print style is only available if you have the GPA software licensed on your HFA II-
i
).
Changing the Print-To-Files Options
Use the following process to change the Print Destination fr
om the initial set up, if necessary.
1 From the Main Menu, select
SYSTEM SETUP
>PRINT SETUP, to open the Print Setup screen.
2 From the Print Setup screen, select the PRINT-TO-FILE SETUP button to display the Print-To-File
Setup screen (Figure 14.42).
Figure 14.42 Print-To-File Setup Screen
3 Select the PRINT DESTINATION: drop-down box (see Figure 14.43). Your available selections in
this drop-down box are:
• PRINT TO PRINTER
Choose this selection if you wish only to print to paper.
• ASK BEFORE PRINT
Choose this selection if you wish to be asked for the prin
t destination each time you en
ter a
print command.
•EXPORT IMAGE FILE
Choose this selection if you wish to transmit a TIFF or PDF image file o
f selected pri
ntouts to
the file server, or an EMR/PMS/DICOM system.
To Next Page
Loading...
