Networking
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
14-34
2 Open the Transfer Destination drop-down box and select DATA EXPORT HOST. This selects your
PC to receive the data and act as the file server. For EMR/PMS/DICOM systems, see “Exporting
to EMR/PMS/DICOM Systems,” on page 14-41.
3 Open the Save/Transmit Option drop-down box and select SAVE AND TRANSMIT.
4 Open the Data Format drop-down box and select XML FILES or XML AND IMAGE FILES.
Use XML Files to tr
ansfer only textual information (patient data and test results) to the network
file server. You will not get a printout image with this setting. Use XML and Image Files to
transfer both graphics (a TIFF or PDF image file of the test printout) and textual information to
the network file server (see “Printing To a File,” on page 14-7).
Note: If your network server connection is lost or gives an err
o
r at the end of your exams, and your
“Save/Transmit Option” is set to “Save and Transmit”, your completed exams will still be saved to
your hard disk but not transferred to your network file server. You can choose to defer the transfer
and continue to take exams, and when the network is back up, use “Transfer Deferred Tests” to
transfer them to your file server (See “Transfer Deferred Tests,” on page 14-34).
5 Press PROCEED. Now when tests are saved the data will be transmitted to your file server (Data
Export Host) after the HFA II-
i
saves your completed exam to the hard drive and optionally to a
USB storage device.
Transfer Deferred Tests
If the Transfer Deferred Tests and Clear Deferred Te
sts buttons are active and not greyed out (Figure
14.37), you have completed exams that ha
ve been saved to your hard drive, but have not yet been
transferred to your network file serve
r or EMR/PMS/DICOM system.
Figure 14.37 Save/Transmit Option screen with Active Transfer Deferred Tests button
This happens when a transfer failed due to a network error and your “Save/Transmit Option”
drop-down box is set to “Save and Transmit” in the Save/Transmit Option function. When a transfer
fails, a dialog box will be displayed to allow you to defer the transmission of the exam as shown in
Figure 14.38. This dialog box will only be displayed for the first failed exam tr
ansfer of the session
To Next Page
Loading...
