Networking
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
14-14
Backing Up Data to the Server
The HFA II-
i
perimeter allows you to back up your patient database to safeguard the data. You can
use USB storage devices or a network file server (see Chapter (11), "Database Management").
Note: You should have a removable storage device available for your netw
ork file server to keep the
backed up data on the server safe from loss. Should something happen to the server, (a computer
hard drive failure, fire or theft for example), the backed up data from the HFA II-
i
would be lost. Just
like the recommendation for using USB storage devices, we recommend you remove the network file
server backup files from the premises and store in a safe place.
Note: Subsequent backups replace the current backup.
Once you have backed up data to the server
, you can r
estore it onto your HFA II-
i
, by following the
steps described in “Restoring Data from the Server,” on page 14-16.
Note: The shared folder or FTP folder that is used for backing up and r
estoring data is the same one
that is used for archiving and retrieving data.
The number of minutes that are required to perform a backup will depend on the amount of data
that is stored
on the hard drive of your HFA II-
i
. Use the following procedure to back up your HFA II-
i
to your network.
1 From the Main Menu, select
FILE FUNCTIONS
.
2 From the File Functions menu, select BACKUP/RESTORE.
Figure 14.9 File Functions Menu
3 When the disk options screen appears, select the down-arrow to open the SOURCE drop-down
box. Select HARD DRIVE (Figure 14.10).
To Next Page
Loading...
Need help?
General
