General Operation
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
2-32
Install Software
This feature allows supplemental testing software
to be installed on the HFA II-
i
from a Carl Zeiss
Meditec USB flash drive. It also allows you to enter software licensing information for such products
as GPA, SITA-SWAP, or HFA-NET Pro. Further details for installing software are provided, beginning
with “Installing & Licensing HFA II-i Software,” on page J-1.
Diagnostics
This feature requires password access and is available only
to Carl Zeiss Meditec personnel. It leads
to a variety of tests that are used for system calibration and repair.
Return to System Setup
This button returns you to the main System Setup screen.
Help Screens
The HFA II-
i
is equipped with help screens to assist you with a number of topics concerning the
instrument’s operation. You may press the
HELP
icon at almost any time to access the on-screen
Help menu. The
HELP
icon is not available when a pop-up window is displayed. You must complete
the action within the pop-up window, or cancel the action, to access the Help menu. When pressing
the
HELP
icon, the Help Topics screen that is shown in Figure 2.10 appears:
Figure 2.10 Help Topics Screen
Make your selection from the list of 12 topics. Topics that require more than one screen of
information will have buttons at the bottom of the screen for advancing to the next screen (or for
returning to the previous screen). Refer to Figure 2.11 for an example of a Help screen.
To Next Page
Loading...
Need help?
General
