Zeiss Humphrey II-i series - Setting up FTP

Humphrey Field Analyzer II- i series User Manual 2660021145640 A
Networking Reference
I-9
Setting Up FTP
To be able to export data and image files from the HFA II-
i , it is necessary to set up Data Export. This
section describes setting up to export to FTP.
1 Select MAIN MENU> SYSTEM SETUP >COMMUNICATIONS SETUP>DATA EXPORT SETUP (or
ARCHIVE/RETRIEVE SETUP, etc.) to reach the screen that is shown in Figure I.8.
2 In the File Server Access Protocol drop-down box, select FTP.
Figure I.8 Data Export Setup Screen
3 Select the FTP FOLDER SETUP button (Figure I.9) to bring up the FTP Folder Setup screen
(Figure I.10).
Figure I.9 Location of FTP Folder Setup Button