Networking
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
14-52
7 From the Work List browser, select the patient you want. Touching an entry on the Work List
browser screen selects it (Figure 14.60) and work item information is displayed below the list.
Touching an entry a second time de-selects it. During the selection process, you
can use the
up/down one line and up/down one screen buttons to move through your file listing more
rapidly, if your listing is two or more screens in length.
Figure 14.60 Work List Browser Screen – Patient Selected
8 Press DETAIL to bring up a Details screen displaying patient and scheduling information. Select
OK to return to the Work List browser.
Figure 14.61 Work List Details Screen
9 Press PROCEED to bring up the Patient Data 1 screen with the selected patient information
displayed. If the selected patient has an Accession Number from the EMR/PMS/DICOM system,
it will appear in the lower left-hand side of the Patient Data 1 screen as shown in Figure 14.62,
with an Accession Number label.
To Next Page
Loading...
Need help?
General
