Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
General Operation
2-33
Each topic displayed may be printed by pressing the PRINT button at the bottom of the Help screen.
The entire text of the subject being viewed will print. Topics requiring more than one screen, such as
“Printing Test Results”, will have the complete text printed, not just the screen you are viewing.
Figure 2.11 Example of a Help Screen
When you have finished with the help topic, press RETURN to return to the Help Topics screen.
Pressing DONE on the Help Topics screen will return you to the screen where you first pressed the
HELP
icon. For example, if you were at the “End of Test” screen when you originally pressed the
HELP
icon, you will return to the same “End of Test” screen when you press DONE on the Help Topics
screen.
Consult this User Manual for additional information on the
subject of interest. The following is the
list of on-screen Help topics and the main areas within this User Manual to find additional
information:
• Entering Patient Data – Chapter (3), "Setting-Up Tests"
• Getting Ready to Test – Chapter (3), "Setting-Up Tests"
• Patient Instructions – Chapter (3), "Setting-Up Tests"
• Trial Lens Selection – Chapter (3), "Setting-Up Tests"
• Changing Parameters – Chapter (4), "Test Parameters and Strategies"
• Using Gaze Tracking – Chapter (5), "Testing"
• Saving Test Results – Chapter (5), "Testing"
• Printing Test Results – Chapter (7), "STATPAC Analysis & Printing"
• Recalling Patient Data – Chapter (3), "Setting-Up Tests"
• Head Tracking/Vertex Monitor (Model 750
i
only) – Chapter (5), "Testing"
• Database Help – Chapter (11), "Database Management"
• Routine Maintenance – Chapter (15), "Care and Cleaning"
To Next Page
Loading...
Need help?
General
