Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
Setting-Up Tests
3-3
Using the Test Library
Use this method to select a test that does not
appear on one of the test buttons.
1From the Main Menu screen, choose SHOW TEST LIBRARY.
2Select the test type. Choose from SCREENING, THRESHOLD,
KINETIC, SPECIALTY or CUSTOM.
In this example, SCREENING is chosen.
3Select the test pattern. There are many test patterns from which to
choose.
Refer to “T
est Library,” on page 3-4 for information on each pattern.
4Select the test eye. Choose RIGHT or LEFT to proceed, or CANCEL to
go back to the Test Library.
5Refer to “Entering Patient Data,” on page 3-7 to continue test
setup.
To Next Page
Loading...
