Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
Introduction & Instrument Setup
1-29
Connection of External Devices
External devices connect to the HFA II-
i
at the rear of the instrument and are hidden from view
behind a panel. Figure 1.4, Figure 1.8, and Figure 1.9 show the location and identification of many
of the connectors that previously were mentioned. On the rear of the HFA II-
i
, a diagram next to the
cable connections panel helps to identify each port. External input devices such as the glidepad,
trackball, mouse and the keyboard require a PS/2 style plug for connection to the HFA II-
i
. Use the
Serial Data Transfer port to plug in an older Model HFA I or HFA II for serial transfer of data. Use the
Network (LAN) port for connection of PC-based communications and networking. Use the USB ports
to connect USB storage devices and/or USB floppy disk drives. Use the VGA video port for
connection of any external VGA monitor.
To Next Page
Loading...
