Fujitsu PRIMERGY RX300 S8

RX300 S8 Upgrade and Maintenance Manual 35
Before you start
Phillips
PH2 / (+) No. 2
0.6 Nm
USB 3.0 PCI
card D3305
M3 x 5 mm
(silver)
(contained in card
kit S26361-D3305-
A10)
Phillips
PH2 / (+) No. 2
SW6
1 Nm
heat sink captive screw
Screw driver /
Bit insert /
torque
Screw Usage Type
Table 2: List of required tools and used screws