6-2
Configuring the Data Link Layer Protocol for E1, T1, and Serial Interfaces
Contents
Configuring HDLC as the Data Link Layer Protocol . . . . . . . . . . . . . . 6-40
Create the HDLC Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-40
Activate the HDLC Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-42
Configure an IP Address for the WAN Connection . . . . . . . . . . . 6-42
Bind the Physical Interface to the Logical Interface . . . . . . . . . . 6-44
Additional Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-45
Settings Explained in Other Chapters . . . . . . . . . . . . . . . . . . . . . . 6-47
Example Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-48
To Next Page
Loading...
Need help?
General
