14-28
Using the Web Browser Interface for Basic Configuration Tasks
Configuring Passwords to Control Management Access to the Router
5. Click Add. The username is now listed under the Modify/Delete User
heading.
6. To remove a username, select it and click Delete.
Configuring an Enable Mode Password
To configure an enable mode password, complete these steps:
1. Select Passwords in the navigation bar and scroll to the bottom of the
Add/Modify/Delete Users window.
2. Select the Enable tab.
Figure 14-21. Configuring a Password for the Enable Mode
3. Select Use Password and then enter and confirm the password you want
to use.
To Next Page
Loading...
