14-95
Using the Web Browser Interface for Basic Configuration Tasks
Configuring Demand Routing for a Primary or Backup Connection
Configuring the Demand Interface
After you configure the ISDN group, you should configure the demand inter-
face. The demand interface handles the Data Link Layer protocol for the
demand-routing connection in addition to other functions for the ISDN call.
The actual Data Link Layer protocol used for demand-routing connections is
PPP.
To add a new demand interface, complete the following steps:
1. Click Demand Routing in the Router/Bridge section of the navigation bar.
Figure 14-69. Add/Delete/Modify Demand Interface
2. On the Add/Delete/Modify Demand Interface screen, in the Demand
Number field, enter a number for the interface in the range from 1 to 1,024.
3. Click the Add New Interface button. The “Demand Configuration” screen
is displayed.
To Next Page
Loading...
