14-33
Using the Web Browser Interface for Basic Configuration Tasks
Configuring Passwords to Control Management Access to the Router
3. Select the Use Local User List option if you want to use the usernames
and passwords configured in this list for SSH access. (This is the default
option.)
4. If you want to use a RADIUS or TACACS+ server to authenticate users
attempting to initiate an SSH session with the router, then you must enable
the AAA subsystem. See “Using the AAA Subsystem to Control Manage-
ment Access” on page 14-35 for instructions on configuring these options.
5. Click Apply.
Configuring a Password for HTTP Access
To configure a password for Web access, complete these steps:
1. Select Passwords in the navigation bar and scroll to the bottom of the
Add/Modify/Delete Users window.
2. Select the HTTP tab.
Figure 14-25. Configuring Passwords for Web Access
To Next Page
Loading...
Need help?
General
