1-50
Overview
Software Overview
Disable
To leave the enable mode context, type disable. The Secure Router OS will
return you to basic mode context.
Erase
The erase command is a file management command. Table 1-6 shows the
erase command options.
Syntax: erase [{cflash | flash} <filename> | startup-config | file-system cflash]
Table 1-6. File Locations for the erase Command
For example, entering erase flash <filename> will delete the file you specify
from internal flash:
ProCurve# erase flash oldconfig
Note When erasing files, be sure to enter the filename exactly as it appears in the
directory.
Erasing the startup-config files will return the router to the factory default
settings at the next reboot. Entering erase startup after executing the
autosynch command will delete the startup-config files from both flash and
compact flash. If you have a compact flash card, and are not running the
autosynch command, this command erases the startup-config only from
compact flash. If you do not have a compact flash card, this command erases
the startup-config file from flash.
Use the erase file-system cflash command to format your compact flash
card memory. Using this command will erase any existing files on your
compact flash card.
File location Description
cflash <filename> erases the specified file from compact flash
file-system cflash formats compact flash
flash <filename> erases the specified file from flash
startup-config erases the startup-config file
To Next Page
Loading...
Need help?
General
