14-12
Using the Web Browser Interface for Basic Configuration Tasks
Managing Files, Firmware, Boot Software, and the AutoSynch™ Function
1. Click the Browse… button next to the Select File box and choose the file
you want to upload.
2. Select either Flash or CFlash to specify the destination location for
the file.
3. To upload the file, click the Upload button at the bottom of the window.
The file is uploaded to your router.
Delete Config File. If you have an old or outdated configuration file or if
you need the room on your router’s flash or cflash memory, you can delete
the file.
Figure 14-7. Delete Config File
1. In the Delete Config File section, use the pull-down menu to display all
the files on flash and cflash and select the file you want to delete.
2. Click the Delete button to erase the file. A confirmation dialog box is
displayed.
3. Click OK to delete the file.
For information about advanced file management functions such as renaming,
uploading, or downloading files, see Chapter 1: Overview.
Firmware
The Firmware section allows you to manage Secure Router OS files. You can
select the Secure Router OS file that is loaded when the ProCurve Secure
Router boots. You can also upload new OS files and delete old files.
To Next Page
Loading...
Need help?
General
