HP ProCurve 7000dl Series User Manual

14-74
Using the Web Browser Interface for Basic Configuration Tasks
Configuring the Data Link Layer Protocol for E1, T1, and Serial Interfaces
Figure 14-52. Statistics for Frame Relay Interface
Configure HDLC as the Data Link Layer Protocol
The following steps explain the initial configuration of HDLC as the Data Link
Layer protocol. It is assumed that you have configured the Physical Layer—
the E1, T1, or serial interface—and you have selected HDLC as the Data Link
Layer protocol. As a result, the HDLC Configuration window is displayed.

HP ProCurve 7000dl Series Specifications

General

Brand	HP
Model	ProCurve 7000dl Series
Category	Network Router
Language	English