8-74
Configuring Demand Routing for Primary ISDN Modules
Troubleshooting Demand Routing
Table 8-16. debug Commands for ISDN
Note Debug functions are processor intensive. The debug isdn commands in par-
ticular display a high volume of messages to the CLI.
Some of the debug isdn commands display numerous messages, which are
displayed too quickly to read. You will probably need to stop the messages
and review them to determine the problem. For example, Figure 8-26 shows
a small portion of the debug messages displayed as a call connects.
Command Description
debug isdn cc-ie displays information about the ISDN call control
debug isdn cc-messages displays call control messages
debug isdn endpoint displays events related to ISDN endpoints
debug isdn events displays information about ISDN events
debug isdn group display errors and messages related to ISDN groups
debug isdn interface displays ISDN interface events
debug isdn l2-formatted displays Layer 2 formatted messages
debug isdn l2-messages displays Layer 2 message
debug isdn resource-manager displays resource manager errors and messages
debug isdn verbose display all errors and messages
To Next Page
Loading...
Need help?
General
