12-21
Domain Name System (DNS) Services
Quick Start
2. If you have not already done so, configure the interface’s IP address:
a. To configure a dynamic IP address for an Ethernet interface, Frame
Relay subinterface, or ATM subinterface, enter:
Syntax: ip address dhcp [hostname <word> | no-default-route | no-domain-
name | no-nameservers]
b. To configure a dynamic IP address for a PPP interface, enter:
Syntax: ip address negotiated [no-default]
c. To configure a static address, enter:
Syntax: ip address <A.B.C.D> <subnet mask | /prefix length>
3. Activate the dynamic DNS client.
Syntax: dynamic-dns [dyndns | dyndns-custom | dyndns-static] <hostname>
<username> <password>
Select dyndns if you have registered for Dynamic DNS, dyndns-custom
if you have registered for Custom DNS, and dyndns-static if you have
registered for Static DNS.
Enter the interface’s hostname. Enter the username and password for
your account with DynDNS.
For example:
ProCurve(config-atm 1.1)# dynamic-dns dyndns-custom procurve admin secret
To Next Page
Loading...
