14-30
Using the Web Browser Interface for Basic Configuration Tasks
Configuring Passwords to Control Management Access to the Router
Figure 14-22. Configuring Passwords for Telnet Access
3. Select the Use Local User List option if you want to use the usernames
and passwords configured in this list for Telnet access.
4. Select the Use password option if you want to configure a separate
password for Telnet access.
5. If you want to use a RADIUS or TACACS+ server to control Telnet access,
then you must enable the AAA subsystem. See “Using the AAA Subsystem
to Control Management Access” on page 14-35 for instructions on config-
uring these options.
6. Click Apply.
To Next Page
Loading...
