14-84
Using the Web Browser Interface for Basic Configuration Tasks
Configuring ADSL Interfaces
26. For Address Type, use the pull-down menu to select:
•None—Select None if you want this interface to be part of a bridge.
•Static—Select Static if you want to configure a fixed IP address for
the interface. When new fields are displayed, enter an IP address and
subnet mask.
•DHCP—Select DHCP if your ADSL service provider wants you to
receive an IP address from its DHCP server.
27. Configure dynamic DNS, if needed. For more information about dynamic
DNS, see “Configuring Dynamic DNS” on page 14-124.
a. For Dynamic DNS, use the pull-down menu to select DynDNS.org,
DynDNS.org Static, or DynDNS.org Custom. Additional boxes are
displayed, allowing you to configure information about your account
with DynDNS.org.
b. For Dynamic DNS Hostname, enter the hostname required to register
the interface’s IP address.
c. For Dynamic DNS Username, enter the username for your company’s
account with DynDNS.org.
d. For Dynamic DNS Password, enter the password for your company’s
account with DynDNS.org.
28. Click Apply to save your configuration.
Figure 14-61. Configuring Dynamic DNS in the IP Settings Section
To Next Page
Loading...
Need help?
General
