14-104
Using the Web Browser Interface for Basic Configuration Tasks
Configuring Demand Routing for a Primary or Backup Connection
Figure 14-77. Add a Static Route to the Route Table
2. In the Destination Address and Destination Mask fields, enter the IP
address and subnet mask, respectively, for the far-end network.
3. Under Gateway, click the Interface option and use the pull-down menu
to select the appropriate demand interface.
4. If you are configuring a route for a backup connection, in the Adminis-
trative Distance field, enter a number for the administrative distance.
5. If you are using network monitoring, in the Track Name field, use the pull-
down menu to select the track for the interface.
6. Click the Apply button to save your changes.
To Next Page
Loading...
Need help?
General
