Keba Kemro K2 User Manual

mask 'Machine equipment'. Further special settings for the forward movement
of the nozzle and for contact force build up can be set here. The contact force
build up after reaching the forward endposition is always executed. It can be
deactivated by setting the Force build up time to 0 seconds.
The operating mode for the nozzle's backward movement can be selected via
Nozzle back mode.
Fig.4-42: Mask "Nozzle - tab profile" (Maschine equipped with transducer for nozzle)
Fig.4-43: Mask "Nozzle" (Maschine equipped with limit switch for nozzle)
Description of the operating masks
KePlast.HMI.KVB
© KEBA 2016
User's manual V3.05108

Keba Kemro K2 Specifications

General

Brand	Keba
Model	Kemro K2
Category	Controller
Language	English