Keba Kemro K2 User Manual

4.97.3 Description of the elements
Pump selection x-y
Field Description
Name Name of movement
Pump 1 Assignment of the movement to Pump 1 with Use
Pump 2 Assignment of the movement to Pump 2 with Use
Pump 3 Assignment of the movement to Pump 3 with Use
4.98 Strokes - Tab1
4.98.1 Purpose
This mask is used to set the principal characteristic values (stroke and diam-
eter) for specific sections oft the machine.
4.98.2 Description of the mask
This mask is divided into the sections:
● Mold
● Ejector
● Inject
● Nozzle
Fig.4-104: Mask "Strokes Tab1"
KePlast.HMI.KVB
Description of the operating masks
© KEBA 2016
User's manual V3.05 197

Keba Kemro K2 Specifications

General

Brand	Keba
Model	Kemro K2
Category	Controller
Language	English