Keba Kemro K2 User Manual

4.41 Nozzle Setup
4.41.1 Purpose
Additional parameters for the nozzle can be configured within this mask.
4.41.2 Description of the mask
Besides general settings for the nozzle, maximum movement and movement
delay times as well as the constant outputs for the nozzle movement in setup
mode can be set.
Fig.4-45: Mask "Nozzle setup"
4.41.3 Description of the elements
Setup mode output
Field Description
Setup mode output forward
Pressure and velocity output for the nozzle forward movement in
setup mode.
Setup mode output back-
ward
Pressure and velocity output for the nozzle backward movement
in setup mode.
Description of the operating masks KePlast.HMI.KVB
© KEBA 2016
User's manual V3.05112

Keba Kemro K2 Specifications

General

Brand	Keba
Model	Kemro K2
Category	Controller
Language	English