Keba Kemro K2 User Manual

Fig.4-28: Maske "Core Ramp Adjust"'
4.25.3 Description of the elements
Mold ramp tuning
Field Description
Ramp mold close
The ramps [%] for movement start and movement stop can be
specified. The %- value refers to the maximum core ramp settings
that are configured in setup advanced mask.
● Start: Defines start ramp value before core moves in in for
mold close movement.
● Stop: Defines stop ramp value before core moves in in' for
mold close movement.
Ramp mold open
The ramps [%] for movement start and movement stop can be
specified. The %- value refers to the maximum ramp settings that
are configured in setup advanced mask.
● Start: Defines start ramp value before core moves in in' for
mold open movement.
● Stop: Defines stop ramp value before core moves in in' for
mold open movement.
Time Calculated duration for each ramp.
4.26 Injection - Tab Profile
4.26.1 Purpose
This mask is used to adjust the settings for the inject movement, cut off de-
tection and hold movements.
Description of the operating masks
KePlast.HMI.KVB
© KEBA 2016
User's manual V3.0586

Keba Kemro K2 Specifications

General

Brand	Keba
Model	Kemro K2
Category	Controller
Language	English