Keba Kemro K2 User Manual

Fig.4-46: Mask "Nozzle setup advanced"
4.42.3 Description of the elements
Minimum profile output
Field Description
Min. profile output forward
The minimum profile output (pressure, velocity) for the nozzle for-
ward movementis adjusted here. The output in any section of the
profile never falls below this value.
Min. profile output back-
ward
The minimum profile output (pressure, velocity) for the nozzle
backward movement is adjusted here. The output in any section
of the profile never falls below this value.
Ramp profile output
Field Description
Max. ramp forward
The maximum ramp (pressure, velocity) for the nozzle forward
movement is adjusted here.
Max. ramp forward before
limit
The maximum ramp (pressure, velocity) for the nozzle forward
movement before reaching the limit switch is adjusted here.
This setting option only exists if a limit switch is available.
Max. ramp forward after
limit
The maximum ramp (pressure, velocity) for the nozzle forward
movement after reaching the limit switch is adjusted here.
This setting option only exists if a limit switch is available.
Max. ramp backward
The maximum ramp (pressure, velocity) for the nozzle backward
movement is adjusted here.
Max. ramp contact force
The maximum ramp (pressure, velocity) for the contact force build
up of the nozzle is adjusted here.
Description of the operating masks KePlast.HMI.KVB
© KEBA 2016
User's manual V3.05114

Keba Kemro K2 Specifications

General

Brand	Keba
Model	Kemro K2
Category	Controller
Language	English