Keba Kemro K2 - Description of the Mask; Description of the Elements

4.23.2 Description of the mask
For the core movement the ramp settings and pump and valve delay times can
be set.
Fig.4-26: Mask "Kern setup advanced - Tab1"
4.23.3 Description of the elements
Core ramp manual output
Field Description
Ramp core in
The maximum ramp (pressure, velocity) for the the core in move-
ment is adjusted here.
Ramp core out
The maximum ramp (pressure, velocity) for the the core out move-
ment is adjusted here.
Core ramp setup mode
Field Description
Ramp core in
Ramp (pressure and velocity) in setup mode for core in movement
is adjusted here.
Ramp core out
Ramp (pressure and velocity) in setup mode for core out move-
ment is adjusted here.
KePlast.HMI.KVB Description of the operating masks
© KEBA 2016
User's manual V3.05 83