Keba Kemro K2 User Manual

4.69 IO Monitor Analog outputs
4.69.1 Purpose
This mask shows the values of the analog outputs of the controller.
4.69.2 Description of the mask
The values of all analog outputs are displayed. Further it is possible to force
an analog output.
If an IO is physically available but no variable is allocated to the IO, only the
IO- number is displayed. However it is possible to force the IO.
If an IO is physically available and allocated to a variable but no text is assigned
to the variable, the name of the system variable is displayed.
Fig.4-73: Mask 'IO Monitor Analog outputs'
4.69.3 Description of the elements
Field Description
AO 0...n
The descirption of the analog output is dis-
played.
The left grey field indicates the current value of
the analog output. The value "- - -" represents
a sensor error.
The input field in the middle configures the val-
ue the analog output is forced to. If a force is
acitve, the value is represented in red color.
The right input field activates the force of the
analog output.
KePlast.HMI.KVB Description of the operating masks
© KEBA 2016
User's manual V3.05 155

Keba Kemro K2 Specifications

General

Brand	Keba
Model	Kemro K2
Category	Controller
Language	English