Keba Kemro K2 - Description of the Mask; Description of the Elements

4.13.2 Description of the mask
Pressure and velocity can be defined for slide table and lock pin movements.
The values for "Slide in" and "Slide out" are specified separately.
Fig.4-15: Mask "Mold options - Tab Slide table"
4.13.3 Description of the elements
Slide table in
Feld Beschreibung
Stages Number of adjustable stages.
Forward1..Forward n
Setting of Pressure and Velocity between the position specified
in field to and the position of the the previous stage during "Slide
table in".
Endposition reached Markers show if the slide table is in.
Slide table out
Feld Beschreibung
Stages Number of adjustable stages.
Backward 1..Backward n
Setting of Pressure and Velocity between the position specified
in field to and the position of the the previous stage during "Slide
table out".
Endposition reached Markers show if the slide table is out.
KePlast.HMI.KVB Description of the operating masks
© KEBA 2016
User's manual V3.05 63