Keba Kemro K2 User Manual

Safety gate open
Field Description
Open fast
Pressure and velocity setting for fast open movement of safety
gate.
Open slow
Pressure and velocity setting for slow open movement of safety
gate.
Maximum settings
Field Description
Max. set pressure
The maximum pressure (upper limit) for the hydraulic settings of
the safety gate can be set in this field.
Max. set velocity
The maximum velocity (upper limit) for the hydraulic settings of the
safety gate can be set in this field.
4.15 Mold options - Tab Coining / Venting
4.15.1 Purpose
The settings for coining and venting can be adjusted in this mask.
4.15.2 Description of the mask
The upper part of the maske displays the settings for venting, the lower part of
the mask displays the settings for coining.
Fig.4-17: Mask "Mold options - tab coining / venting"
Description of the operating masks
KePlast.HMI.KVB
© KEBA 2016
User's manual V3.0566

Keba Kemro K2 Specifications

General

Brand	Keba
Model	Kemro K2
Category	Controller
Language	English