4.75.2 Description of the mask
The mask shows all free temperature inputs that are available for the selected
module.
Fig.4-79: Mask ''IO Replace TI'
4.75.3 Description of the elements
Name Description
Free IO
Listing of all free IO's which can be used for
allocation.
Defect IO
Declaration of the defective IO's which should
be reallocated. In order to allocate an already
replaced IO to the original IO (e.g. the defective
IO has been fixed), value '-1' has to be entered.
Variable name
After the allocation, the short text of the alloca-
ted IO appears.
4.76 CAN-Monitor
4.76.1 Purpose
CAN controller information and statistics are displayed on this mask .
4.76.2 Description of mask
This mask is divided into serveral sections:
● CAN Monitor: Activation of CAN monitoring and display of the current bus
state.
KePlast.HMI.KVB
Description of the operating masks
© KEBA 2016
User's manual V3.05 161
To Next Page
Loading...
