Field Description
Backpressure
Amplitude und frequency for the sinus singal of the pump pressure
analog output.
Amplitude = 0 deaktivates this function.
4.112
Drive Monitor
4.112.1 Purpose
This mask shows the essential drive parameters (actual values) during live
operation. For master and slave(s) a seperate mask is displayed.
Information
The mask is only displayed if the option speed pump is used.
4.112.2 Description of the mask
Informations about the temperature, the drive status and the drive firmware
version are displayed.
Fig.4-118: Mask "Drive Monitor"
KePlast.HMI.KVB
Description of the operating masks
© KEBA 2016
User's manual V3.05 219
To Next Page
Loading...
