Information
The lock status of the machine can be changed by entering a valid lock key
or unlock key on this mask.
The lock status of the machine can also be changed with a USB device that
contains a valid lock key or unlock key.
As soon as a USB device with valid machine lock or unlock data is detected,
a confirmation dialog appears that contains the actual as well as the new lock
status of the machine. By confirming the dialog, the new lock status will be
applied.
A lock or unlock key can only be used for one time. After that the key becomes
invalid.
If the USB device contains multiple lock keys, always the lock key with the
expire date which lies the farthest in the future will be used. All other lock keys
on the USB device also become invalid as soon as the lock key which lies the
farthest in the future becomes active.
If the USB device contains a lock key and a unlock key, always the unlock
key will be used.
4.91.2 Description of the mask
Fig.4-96: Maske 'Machine Lock/Unlock'
Description of the operating masks
KePlast.HMI.KVB
© KEBA 2016
User's manual V3.05186
To Next Page
Loading...
Need help?
General
