Keba Kemro K2 - Description of the Elements; Alarmlog; Infolog Masks; Purpose; Description of the Mask

Fig.4-83: Mask "Software version"
4.79.3 Description of the elements
Field Description
System Display of the system used.
HMI Version Display of the HMI version.
IEC Version Display of the IEC version.
Customer Version: Display of the customer system version.
Firmware Display of the firmware version.
CPU serial number Display of the control's serial number.
4.80 Alarmlog / Infolog masks
4.80.1 Purpose
System events (alarms, user changes, system errors, etc.) are recorded and/
or logged in this masks. In this way a complete history is available.
The masks only display informations. Alarms cannot be confirmed here.
4.80.2 Description of the mask
All system events are shown in the table.
The left part of the table shows the date and time when the event occurred.
The right part of the table contains the description of the event that is associ-
ated with the date and time.
A status line underneath the table shows the entire text of the selected entry.
KePlast.HMI.KVB
Description of the operating masks
© KEBA 2016
User's manual V3.05 167