Keba Kemro K2 User Manual

1.3.2 Not contained in this document
● Does not supply setting values for the injection molding machine.
● Does not describe the installation and programming of the KePlast HMI
KVB visualization.
● Does not describe sequence of injection molding process
1.4 Documentation for further reading
Doc.No. Designation Target group
1008451
Kemro.view.basic, program-
ming manual
Intended for programmers.
Describes the programming
and functionality of the
view.basic visualization.
1000349
view.basic IEC- library de-
scription, programming man-
ual
Intended for programmers.
This library contains algorithm
blocks and functions for pro-
gramming view.basic in KeS-
tudio IECEdit.
1000927
KePlast.MachineLockFunc-
tion, user's manual
Intended for machine setter
and machine operator. De-
scribes the functionality of Ke-
Plast.MachineLock-Function
1008390
KePlast Mold valve control, us-
er's manual
Intended for machine startup
technicans. Describes the set-
up of a mold servo valve.
1000972
KePlast Servo valve control,
user's manual
Intended for machine startup
technicans. Describes the set-
up of an injection servo valve .
Introduction KePlast.HMI.KVB
© KEBA 2016
User's manual V3.0518

Keba Kemro K2 Specifications

General

Brand	Keba
Model	Kemro K2
Category	Controller
Language	English