Keba Kemro K2 User Manual

Fig.4-98: Mask "Machine data tab1"
4.92.3 Description of the buttons
Name Description
Load
All machine-specific settings are uploaded from the USB-stick or
the compact flash. In addition an advice will be displayed which
has to be confirmed before loading the machine data.
Save
Current machine-specific settings are saved to the USB-stick or
the compact flash. In addition an advice will be displayed which
has to be confirmed before saving the machine data.
Backup
Opens the machine data backup mask. Therein a backup of the
actual available machine data record can be created resp. an
available backup can be restored.
Drive
Allows the target to be selected for saving and loading (Compact
Flash or USB storage medium, if connected). The current selection
is displayed at the upper edge of the mask.
4.93 Machine data - Tab2
4.93.1 Purpose
Machine-specific settings, such as the number of heating zones, maximum
injection velocity etc. can be loaded and saved in the Machine data mask.
4.93.2 Description of the mask
On the left side, the name of the machine data record is listed. On the right
side, the creation date of the machine data record is listed.
Description of the operating masks
KePlast.HMI.KVB
© KEBA 2016
User's manual V3.05188

Keba Kemro K2 Specifications

General

Brand	Keba
Model	Kemro K2
Category	Controller
Language	English