Keba Kemro K2 - 4.103 Auto Calibration Procedures

Fig.4-108: Mask 'Lintab select mask'
4.102.3 Description of the elements
Button Description
Load
Loads the selectied linearization table from a
file. The available data must be located in di-
rectory <persistence-path>\workspace
\DATA\lintab\togglelever.
4.103 Calibration - Tab Auto calibration
4.103.1 Purpose
This mask is used for the calibration of transducers and valves automatically.
KePlast.HMI.KVB Description of the operating masks
© KEBA 2016
User's manual V3.05 203