Keba Kemro K2 - 4.118 Automatic Maximum Speed Calibration; Purpose; Description of the Mask; Description of the Elements

4.118 Automatic maximum speed calibration
4.118.1 Purpose
In this mask the automatic maximum speed identification can be executed.
4.118.2 Description of the mask
The identified values for the ejector, mold, nozzle and inject are displayed.
4.118.3 Description of the elements
Start auto speed calibration
Field Description
Do Calibration
Starts identification of maximum speed for the
desired movement.
4.119 Automatic minimum speed calibration
4.119.1 Purpose
In this mask the automatic identification of the minimum profile output for the
velocity can be executed.
If a system pressure is available for any movement the pressure is also meas-
ured.
Description of the operating masks
KePlast.HMI.KVB
© KEBA 2016
User's manual V3.05230