Buzzer
Field Description
Buzzer on time The duration of the signal is specified here.
Buzzer pulse time The pulse duration of the signal is specified here.
Cavity pressure sensor
Description
The cavity pressure sensor
which will be used for
measuring is selected here.
The measurement of cavity
pressure is activated here.
4.54 Mold data
4.54.1 Purpose
Mold-specific settings (e.g. all process data such as movement settings, pro-
files, temperature set-points etc.) can be stored and uploaded again as mold
data record in the mold data mask.
4.54.2 Description of the mask
On the left side, the name of the mold data record is listed. On the right side,
the creation date of the mold data record is listed.
The progress bar in the lower section of the mask shows the actual progress
of the loading- resp. saving- procedure.
New mold data records can be saved via the menu bar, while existing records
can be loaded or deleted.
KePlast.HMI.KVB Description of the operating masks
© KEBA 2016
User's manual V3.05 133
To Next Page
Loading...
Need help?
General
