Keba Kemro K2 User Manual

Fig.4-22: Mask "Ejector setup advanced"
4.19.3 Description of the elements
Minimum profile output
Field Description
Min. profile output forward
The minimum profile output (pressure, velocity) for the ejector for-
ward movement is adjusted here. The output in any section of the
profile never falls below this value.
Min. profile output back-
ward
The minimum profile output (pressure, velocity) for the ejector
backward movement is adjusted here. The output in any section
of the profile never falls below this value.
Shake output
At change in direction of ejector movement, the profile output
(pressure, velocity) ramps down to this value. If the set value is
greater than the last profile output of the 'Ejector forward' and
'Ejector backward'- movement, the last profile output of the 'Ejector
forward' and 'Ejector backward'- movement is used.
Ramp profile output
Field Description
Max. ramp forward
The maximum ramp (pressure, velocity) for the the ejector forward
movement is adjusted here.
Max. ramp backward
The maximum ramp (pressure, velocity) for the the ejector back-
ward movement is adjusted here.
Tolerance
Field Description
Endposition tolerance
Tolerance for detecting ejector forward and backward endposition.
Tolerance is +/-.
KePlast.HMI.KVB Description of the operating masks
© KEBA 2016
User's manual V3.05 75

Keba Kemro K2 Specifications

General

Brand	Keba
Model	Kemro K2
Category	Controller
Language	English