Keba Kemro K2 User Manual

Fig.4-95: Mask "Network settings"
4.90.3 Description of the elements
Field Description
IP-Adress The IP-address of the system is set here.
Subnetzmask The subnetmask is set here.
Gateway The gateway is set here.
4.91 Machine Lock/Unlock
4.91.1 Purpose
This mask serves for locking/unlocking the machine.
The machine producer can agree with the client upon a testing phase. If no
valid unlock key has been entered until the end of the testing phase (e.g. 1
month), the machine will be locked, which means that the motor will be turned
off and no further production is possible.
For unlocking the machine an unlock key has to be requested from the man-
ufacturer of the injection molding machine.
KePlast.HMI.KVB
Description of the operating masks
© KEBA 2016
User's manual V3.05 185

Keba Kemro K2 Specifications

General

Brand	Keba
Model	Kemro K2
Category	Controller
Language	English